- Knowledge base
- Design (Merchants)
- Configure print settings
-
Account Setup
-
MicroStores (Team stores)
-
Catalog
-
Orders and leads
-
Storefronts
-
Embellish
-
Design (Merchants)
- Introduction
- Upload 3D products
- Visualize 2D sketch in a 3D render
- Configure the Design Studio
- Upload customizable designs
- Configure design steps
- Configure color settings
- Configure print settings
- Configure image settings
- Configure placeholders
- Configure personalization
- Configure pattern overlay
- Configure light settings
- Share and export
-
Design (Customers)
-
Content Builder
-
Discounts & Upcharges
-
Reporting
-
Integrations
How to create a print library
Not all customers have prints available, so being able to select one from the library in the 3D configurator is important.
How to add a print to the library
In order to add prints, navigate to the 'Design' tab in your dashboard.
Click on the Print Library tab. Here, you can drag-and-drop all your prints in one go.
What can I do in the print library?
You can set the default scale, rotation, and offset each of your prints.
What does offset mean?
- Offset X means the degree to which you can move the print horizontally (left or right).
- Offset Y means the degree to which you can move the print vertically (up or down).
Make sure all your prints are in SVG file format for best performance and to ensure print readiness afterward. You can alternatively use PNG or JPG file formats, but this will increase loading times and may not always be suitable for printing.
In the case of PNG or JPGs, have a dot per inch (DPI) higher than 150.
We advise using 300 DPI for good print and production results.